Offgridtec® ETFE-AL 100W V2 semi-flexible 23V solar panel

2 overlapping ETFE layers

improved slip resistance

long-term higher yields due to better light transmission

solid ETFE front provides protection against hail

2 bypass diodes - minimized power loss in case of shading

resistant to salt water

operates with 11-busbar technology

integrated AL backsheet

12 months warranty - you can find information about warranty conditions here

On the front side of the module, two overlapping ETFE layers provide solid protection for the internal cells and ensure high light yield over many years. Thanks to a new structure of the outermost layer, slip resistance has been significantly improved and the module can be walked on without any problems. In the long term, higher yields are achieved due to better light transmission and significantly less clouding of the transparent ETFE front layers compared to conventional solar modules with different front coatings. The solid ETFE front offers strong protection against hail and makes the module absolutely resistant to salt water. The integrated AL backsheet virtually eliminates the risk of cell cracks caused by improper handling or installation. The series is equipped with the best solar cells, which offer a high cell efficiency of 22.3 percent.

Power management is handled by 11 busbars. With this advanced technology, power is managed via eleven electrical conductors (busbars). This enables reliable throughput even at high currents, while minimizing heat loss at the same time. The efficient distribution of electricity ensures solid performance of the solar modules, leading to improved overall efficiency and higher yields.

Monocrystalline solar modules are an advanced form of photovoltaic modules made from a single crystal lattice. This crystalline structure enables higher efficiency in converting sunlight into electrical energy compared to other types of solar modules. The monocrystalline cells are characterized by their uniform structure, which allows for more efficient movement of charge carriers. This leads to better performance, especially in situations with limited space, as monocrystalline modules have a higher power density.

Power (Pmax): 100 Wp

Voltage (Vmp): 23.9 V

Max. current (Imp): 4.19 A

Open-circuit voltage (Voc): 28 V

Short-circuit current (Isc): 4.39 A

Max. system voltage: 200 V

Dimensions: 980 x 580 x 4 mm

Operating temperature range: -40°C - 85°C

Integrated bypass diodes

Material composition: Aluminum, ETFE

Walkable: Yes

Bendable: max. 10° (longitudinal)

Cell efficiency: 22.3%

Weight: 3.44kg