Victron MultiPlus-II 48/5000/70-50 230V
charge power: 4.000 W
Status:
available
€860.00
incl. 19% VAT
, excl.
The Victron MultiPlus-II 48/5000/70-50 is a powerful inverter/charger combination device. It delivers up to 5 kW of AC power, features a 70 A battery charger, and a 50 A AC transfer switch. Thanks to features such as PowerControl, PowerAssist, and anti-islanding, it is suitable for off-grid, grid-connected, as well as energy storage (ESS) systems.
Properties Victron MultiPlus-II 48/5000/70-50 230V
charge power
4000 W
length
607 mm
height
149 mm
width
320 mm
weight
29 kg
Always enough power thanks to PowerControl and PowerAssist
A maximum grid or generator current can be set on the Multiplus-II 48/5000/70-50. The MultiPlus-II then takes into account other connected AC consumers and only uses the current that is still 'left over' to charge the battery. This prevents the generator or grid connection from being overloaded (PowerControl function). With the PowerAssist function, the PowerControl principle gains a new dimension. Power peaks often occur only for a limited period of time. In such cases, the MultiPlus-II immediately compensates for insufficient generator, shore power, or grid power by drawing energy from the battery. When the load is reduced, i.e., when consumers are switched off, the now sufficiently available energy can be used to charge the batteries again.
Solar power: AC power even during grid failure
The device can be used with both off-grid and grid-connected PV systems as well as with other alternative energy systems. It can be used with both solar charge controllers and grid-tied inverters.
Maximum flexibility thanks to two AC outputs
The main output ensures uninterrupted operation. In the event of a power failure or an interruption of shore/generator power, the MultiPlus-II takes over the supply to the connected loads. The switchover happens so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. The second output only supplies power when AC is available at the input of the MultiPlus-II. Loads that must not discharge the battery, such as a water heater, can be connected to this output.
Many options for system expansion
The settings can be changed within a few minutes using the VEConfigure software (a computer or laptop and an MK3-USB interface are required for this). Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart Dongle), battery monitor, Digital Multi Control Panel.
Configuration and monitoring from a distance
Install a Color Control GX or other GX products to connect to the internet. The operating data can be stored and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the internet, they can be accessed remotely and settings can be changed.
Key performance features of the Multiplus-II 48/5000/70-50
-
PowerControl and PowerAssist – Increasing grid or generator power
-
Built-in anti-islanding function and connection option for external current sensor (optional)
-
Can be used as a backup device in grid-connected systems for power supply during grid outages
-
Usable in various ESS (Energy Storage System) applications
-
Ideally suited for professional seafaring, yachts, vehicles, and land-based, off-grid applications
-
VE.Bus interface for parallel and three-phase operation, remote monitoring and system integration
-
Virtually unlimited power through parallel and three-phase operation
-
Can be configured on-site or remotely using VEConfigure software*
Technical features
-
5000 W power with non-linear load, 4000 W continuous load, and 9000 W peak power
-
for 48 V battery voltage, 50 A transfer switch and 70 A battery charger
-
Output voltage: 230 VAC, Frequency: 50 Hz
-
max. efficiency is 95%, protection class IP22
Scope of delivery:
-
1x user manual
-
1x Victron PMP482505012 Multiplus-II 48/5000/70-50A
Downloads
Victron_ESS_Installation_Manual (2)
Victron_MultiPlus-II-230V_Manual
Victron_VictronConnect-VE-Bus-Configuration_Manual
Victron_MultiPlus-II-230V_Manual
Victron_ESS_Installation-Manual (2)
Victron_Automatic-Generator
Victron_MultiPlus-II-48-5000-230V_Dimensions
Victron_MultiPlus-II_CE
Victron_MultiPlus-II_Certificate-ESS-NRS-097
Victron_MultiPlus-II-3kVa-15kVa-230V_DataSheet
Victron_VictronConnect-VE-Bus-Configuration_Manual
Victron_MultiPlus-II-3kVa-15kVa-230V_Datasheet
Due to the current cookie settings, the Youtube video cannot be displayed.
How does the order process work?
Simply click on "Add to cart". In the next step, enter your personal data and choose your preferred payment method.
As a specialist dealer, we will check your order and send you an order confirmation and invoice. After receipt of payment, we will send the desired items directly to the desired delivery address.
Within Germany, the delivery time is 3-4 working days. Of course, you will also receive a tracking link for your order.
Afterwards, we are always available personally for questions about assembly. Of course, we also provide instructions, tips and soon also explanatory videos.
For all products in our range, we offer a 2-year warranty - for some products even more.
In case of complaints, we are your contact person, we help you to ensure that everything runs smoothly. You can always reach us by email or phone. We also provide support for possible spare parts at any time. Your boat is our drive.
Your advantages using greenboatsolutions
Few clicks will save you a lot of time and stress!
You will get a result within 5 minutes.
You compare nearly 600 different electric motors.
You have an overview of more than 30 manufacturers.