Fischer Panda E-flanged motor 20 kW 1200 rpm

Conversions are in full swing - Reserve a spot with a boat builder in good time for the conversion to an inboard or pod motor now!

Start

motor

Fischer Panda 20 kW 1200 rpm POD

Fischer Panda 20 kW 1200 rpm POD
Fischer Panda 20 kW 1200 rpm POD
Fischer Panda 20 kW 1200 rpm POD - image 0
Fischer Panda 20 kW 1200 rpm POD - image 1
Fischer Panda 20 kW 1200 rpm POD - image 2
Fischer Panda 20 kW 1200 rpm POD - image 3

Fischer Panda E-flanged motor 20 kW 1200 rpm

Input power: 22 kW

Status:

upon request

Shipping:

upon request

On request

applepay
banktransfer
klarnapaylater
klarnapaynow
creditcard
paypal
Electric pod motor with a power of 20 kW is suitable for boats up to about 20 tons displacement. The Fischer Panda electric motor is completely silent and 100% emission-free. Speed: 1200 rpm

Properties Fischer Panda 20 kW 1200 rpm POD

Input power

22 kW

shaft power

20 kW

Voltage

48 V

rotations per minute

1200 rpm

torque

160 Nm

weight

76 kg

Noise level

almost silent

display

board computer with digital display

Speed control

stepless

saltwater resistant

Yes

cooling

water

shafttype

no shaft

propeller

not included


20 kW Fischer Panda E-flange motor - high safety

  • Efficiency & no maintenance. All motors run without gears, are brushless and have no oil filling.
  • Plug & Play connection thanks to the EasyBox from Fischer Panda.
  • The three-stage seal offers a highest degree of safety.
  • We recommend a 100% electric version. Alternatively there is a parallel hybrid or a generator to increase the range. Depending on how much and how far you want to drive.
  • Easier maneuverability thanks to permanent magnet motors, even at low speeds Very interesting especially for harbor maneuvers.
  • Professional 24 h support.
  • Fischer Panda motors are made of high quality and durable stainless steel.
20 kW Fischer Panda E-flange motor - high safety

Comfort in operation - 20 kW Fischer Panda E-flanged motor

  • Dual drive system is uncomplicated possible. Ideal for catamarans.
  • Absolutely silent, even with a generator from Fischer Panda the noise is minimal.
  • Always power on board your boat.
  • LCD panel allows easy control and handling.
  • Low maintenance costs and low electricity costs. We recommend the extension with solar cells.
  • Several steering positions possible on board the ship.
Comfort in operation - 20 kW Fischer Panda E-flanged motor

Comparison of 20 kW hub motors

Fischer Panda 20 kW 1200 rpm POD
Fischer Panda 20 kW 1200 rpm POD
WaterWorld 18.0
WaterWorld 18.0
Aquamot Trend 20.0 FM
Aquamot Trend 20.0 FM
Aquamot Trend 25.0 FM
Aquamot Trend 25.0 FM
Rim Drive Pod 22
Rim Drive Pod 22
Rim Drive Pod 25
Rim Drive Pod 25
Aquamot F200e
Aquamot F200e
Aquamot F250e
Aquamot F250e

Fischer Panda 20 kW 1200 rpm POD

WaterWorld 18.0 Aquamot Trend 20.0 FM Aquamot Trend 25.0 FM Rim Drive Pod 22 Rim Drive Pod 25 Aquamot F200e Aquamot F250e
Price On request14.749,00 €7.999,00 €8.999,00 €29.699,00 €29.699,00 €13.399,00 €13.899,00 €
Availability
upon request
available
available
available
available
available
available
available
Shipping upon request 3-4 weeks 3-4 weeks 3-4 weeks 3-4 weeks 3-4 weeks 3-4 weeks 3-4 weeks
Input power 22 kW 18 kW 20 kW 25 kW 22 kW 25 kW 21.69 kW 27.8 kW
weight 76 kg 82 kg 47.6 kg 48.9 kg 70 kg 70 kg 49 kg 50 kg
rotations per minute 1200 rpm - rpm 1500 rpm 1500 rpm 1500 rpm 1000 rpm 1500 rpm 1500 rpm

Technical details of the 20 kW Fischer Panda E-flange motor

  • Space-saving compared to conventional boat drives.
  • Fischer Panda offers above all individual and highly professional solutions that are matched to the boat. The installation space of your boat is used optimally.
  • Recuperation is not as efficient as with other manufacturers.
  • Recuperation when sailing with a sailor. During the trip, the battery can be recharged via the propeller.
  • Voltage range at 48 V. No high voltage system necessary.
  • Compatibility with the desired batteries of different manufacturers possible.
Technical details of the 20 kW Fischer Panda E-flange motor

Fischer Panda 20 kW E-flange motor

Due to the current cookie settings, the Youtube video cannot be displayed.

Information about the Fischer Panda Podmotor 20 kW 1200 rpm

High torque at low speed pays off. Fischer Panda drive systems are therefore also ideally suited for commercial applications. With the 10 kW parallel hybrid drive, a 70-ton vessel can be easily brought up to 7 km/h.

The variants with high speed are all the more suitable for use in gliding boats. In a gliding boat, in contrast to a displacer, you should pay attention to the weight of the batteries and correspondingly high performance of the entire system. We are happy to help you here with our free advice.
Information about the Fischer Panda Podmotor 20 kW 1200 rpm

The E-flange motors from the manufacturer Fischer Panda

The Fischer Panda GmbH is a globally active manufacturer of diesel generators and hybrids, as well as purely electrical drive systems. Their products are used in mobile vehicle applications and the marine sector.

All products from Fischer Panda impress with a high quality and "Made in Germany". The electric motors are offered for various types of installation and applications. The pod motor and the shaft system are the core products of Fischer Panda.

The electric boat drives are offered with a power output from 7.5 kW to 100 kW. The option of double motorization or a second control stand is of course also available.
The E-flange motors from the manufacturer Fischer Panda

Innovations made in Germany

Fischer Panda is best known for its very quiet and compact generators. The product range includes generators from 2.5 kW to 200 kW and models with fixed or variable speed, as well as direct current, alternating current and also three-phase current.

At Fischer Panda customers receive complete systems from one source. The drive systems are particularly valued in the commercial sector. This is ensured by a high level of customer service and a worldwide service network in more than 80 countries.
Innovations made in Germany

How does the order process work?

1. Enter data

Simply click on "Add to cart" or "Request quote". In the next step, please enter your contact details and provide us with as much information as possible about your boat and your driving style.

2. Submit request

The selected products are not freely available for sale. Some electric motors and batteries (especially in the high-voltage range) are only sold and installed through shipyards or special partners. Therefore, we will direct you to a suitable contact person in your region.

3. Wait for response

Your request will be answered by us within 24 hours. We can answer many questions about the products. If there are suitable alternatives to the requested product, we will gladly make a suggestion. Otherwise, we will be happy to refer you.

Your advantages using greenboatsolutions

easy.

Few clicks will save you a lot of time and stress!

fast.

You will get a result within 5 minutes.

comparable

You compare nearly 600 different electric motors.

transparent.

You have an overview of more than 30 manufacturers.

contact image