Installation of electric inboard motor in your boat

We are starting to convert your boats to electric motors for the next season - contact us now!

Home Shop

Services

Inboard motor installation

Einbau Innenborder
Einbau Innenborder
Einbau Innenborder - image 0

Installation of electric inboard motor in your boat

Status:

available

Shipping:

2-3 days

On request

applepay
banktransfer
creditcard
paypal
klarna

Your mobile installation service for installing a new electric inboard motor in your boat. Affordable and fair prices. Optionally, we also have partners in your area or work with your local shipyard or boat builder.

Do you still have questions? Have you already read our detailed report on the \">conversion of a sailing boat to an electric inboard motor? (including driving curve and components)


Properties Inboard motor installation

special feature

inboard engine

Location

mobile


Our mobile installation service

We are receiving more and more requests for the installation of our inboard engines (VETUS, WaterWorld, Aquamot, ...) in our customers' boats. We offer a mobile inboard installation service.

Is your boat stored in a hall with a power connection or on the shipyard premises during winter? That's all we need!

If you want us to remove the old diesel engine, it would be helpful if there is a small crane available on site. In theory, installation can also be carried out outdoors in dry weather.

Our Björn drives directly to your boat with his workshop van and carries out the conversion.

Our mobile installation service

Conversion of inboard engine to electric

Frequently asked questions about inboard engine conversion

It depends! If the diesel engine has already been removed, installing the inboard engine takes about 2 days.

The most time-consuming part is the perfect alignment of the inboard engine with the shaft. In addition, cables need to be laid in the boat and components such as the throttle lever and display need to be installed. It's best to take a look at the following illustration.

Note: In very tight installation spaces, the installation may always take a little longer.

It depends! In Germany, the hourly rates of shipyards and boat builders are usually between 60 and 100€ per hour (this may vary abroad).

Assuming 2 days at 80€ per hour and 8 working hours per day, we have installation costs starting from 1,600€ net for the installation. In addition, there is usually a flat rate for materials (depending on the installation situation) and the costs for travel and accommodation.

You can save the most money by using a boat builder or service that has already installed an electric inboard motor before. An inexperienced boat builder may need 3 or 4 days for the installation. Even if the boat builder charges €10 less per hour, it will end up being significantly more expensive overall.

Some tasks, such as removing the old diesel engine or cleaning the engine compartment, can also be carried out by yourself in consultation with us or the shipyard.

As a rule, the electric motor fits easily into the existing engine compartment. Occasionally, the inboard motors are too long, but for this we also have special models where the controller can be installed separately from the motor.

In our consultation, we look for detailed solutions for the installation and are happy to help. Our service is, of course, free of charge. We would be delighted if you order from us, our offer, and the components, or even have us do the installation for you. Thank you!

Offer for inboard engine conversion

It’s best if you send us some information about the boat and a few pictures of the installation space, then we will prepare an individual offer for you.

Wiring diagram of an inboard system

Inboard wiring diagram

Procedure for installing the inboard engine

The most time-consuming part is aligning the motor to the existing shaft system. The vibration dampers are installed and the angle of the motor is adjusted to match the propeller shaft.

However, wiring the motor, battery, display, throttle, main switch, fuses, charger, and shore power socket can also take some time – and of course, a function test must be carried out at the end.

  • Procedure for installing the inboard engine-1
  • Procedure for installing the inboard engine-2
  • Procedure for installing the inboard engine-3
  • Procedure for installing the inboard engine-4
  • Procedure for installing the inboard engine-5

Local boat builders near you

  • Installation of inboard engines in Berlin (Wannsee, MĂĽggelsee, MĂĽritz)

  • Installation of inboard engine Baltic Sea (Greifswald, Kiel, Wismar, RĂĽgen, Rostock)

  • Installation of inboard engine North Sea (Bremen, Bremerhaven, Elbe)

  • Inboard engine installation Hamburg

  • Installation of inboard engine Bavaria (Lake Starnberg, Lake Chiem)

  • Installation of inboard engine Lake Constance (Germany, Switzerland)

Local boat builders near you

Boat builders near you (Europe)

  • Installation of inboard engine France

  • Installation of inboard engine Spain

  • Installation of inboard engine Italy

  • Installation of inboard engine Netherlands

  • Installation of inboard engine Poland

Boat builders near you (Europe)

Advantages of an electric inboard motor

  • Quiet and low-noise while driving

  • Efficiency and torque (the boat runs with low consumption

  • No maintenance = low operating costs

  • Very durable and safe

  • Environmentally friendly

Advantages of an electric inboard motor

Shipyard or boat builder for electric conversion

Installing an electric inboard motor is a big step towards a whole new boating experience. With our mobile installation service, we offer you a convenient, flexible, and competent solution.

If you are ready to make the switch to electric propulsion, get in touch with us.

Shipyard or boat builder for electric conversion

Consultation on inboard engines

Open questions?

Consultation on inboard engines

How does the order process work?

1. Ordering and payment

Simply click on "Add to cart". In the next step, enter your personal data and choose your preferred payment method.

As a specialist dealer, we will check your order and send you an order confirmation and invoice. After receipt of payment, we will send the desired items directly to the desired delivery address.

2. Delivery and installation

Within Germany, the delivery time is 3-4 working days. Of course, you will also receive a tracking link for your order.

Afterwards, we are always available personally for questions about assembly. Of course, we also provide instructions, tips and soon also explanatory videos.

3. Warranty and questions

For all products in our range, we offer a 2-year warranty - for some products even more.

In case of complaints, we are your contact person, we help you to ensure that everything runs smoothly. You can always reach us by email or phone. We also provide support for possible spare parts at any time. Your boat is our drive.

Your advantages using greenboatsolutions

easy.

Few clicks will save you a lot of time and stress!

fast.

You will get a result within 5 minutes.

comparable

You compare nearly 600 different electric motors.

transparent.

You have an overview of more than 30 manufacturers.

Any questions?

Send us a message!

contact image