<p>Elco EP-250 PS electric inboard motor</p>
Input power: 105 kW
Status:
available
Shipping:
6-8 weeks
74.999,00 €
incl. 19% VAT
, excl.
Properties Elco EP-250
shafttype
Short/Normal shaft
control
remote gas
Input power
105 kW
peak performance
105 kW
comparable thrust
250 PS
comparable speed
140 horsepower
Voltage
400 V
rotations per minute
6000 rpm
weight
93 kg
Noise level
audible sounds
display
no battery indicator
Speed control
continuously
saltwater resistant
yes
cooling
air
propeller
not included
maximum boat weight
50000 kg
recommended boat length
25 m
length
584 mm
width
457 mm
height
381 mm
Recuperation
no
Warranty
2 Years
Safety of Elco EP-250
-
Safe navigation. No more risk of fuel leaking on board.
-
Maintenance-free air-cooled system
-
Safety precautions such as overspeed protection, overload protection, temperature protection, overvoltage and overcurrent protection
-
Efficient and durable engine technology
-
All products from Elco are manufactured in the USA.
-
The Elco EP-250 has a voltage of 400 V and must be commissioned by a certified high-voltage technician.
Elco EP-250- Comfort
-
External batteries are universally applicable. Safe LiFePO4 batteries or AGM batteries can be used.
-
Little to no maintenance costs
-
Lower operating costs compared to conventional gasoline engines
-
The installation takes place directly at the location of the former diesel engine. In general, the shaft can be reused; only a flange for installation is required.
Technology of Elco EP-250
-
Brushless PMAC motor with an efficiency of over 90 percent
-
Constant power across the entire speed range
-
The drive system is housed in a waterproof aluminum casing.
-
Comparable to a 250 PS gasoline outboard.
-
Motor and controller are located in a housing
Elco inboard motor for boats
Due to the current cookie settings, the Youtube video cannot be displayed.
Range of Elco EP-250
Travel time and range depend on the battery. In an example with a 20,000 kg heavy boat and a 100 kWh battery, we have the following measurements:
✓ Under full load, the battery lasts just over an hour and the boat reached a speed of 18 km/h. The range was 18 km.
✓ At 1/2 power (40 kW), the driving pleasure lasts for a 2.5-hour trip on the water at a cruising speed of 14 km/h and a range of 35 km.
✓ Those planning longer and more leisurely trips on the water can go significantly further with less power. At 1/10 of the power (8,000W), a speed of 8 km/h was maintained for 12 hours. In total, a range of 96 km with just one battery charge.
100% electric or as a hybrid for the boat
The manufacturer Elco from the USA
Welcome to our sustainable electric outboards from Elco. The company Elco has been producing various products since 1893 and is also very active in the maritime sector.
Elco offers the perfect entry into the advantages of electric mobility with the 6 HP electric inboard motors. The power range currently goes up to 150 kW, providing a good solution even for heavy displacement.
Successful customer projects by Elco
Elco Dash App
The DASHmotor app from Elco wirelessly transforms any iOS or Android mobile device into a fully functional dashboard. With the optional Bluetooth interface, the free app is available in the Apple Store or Google Play Store.
The app displays speed in MPH, km/h, or knots, as well as RPM and remaining battery charge both graphically and numerically, along with volts, amps, and watts. By calculating the remaining battery life in hours and nautical miles, the DASH app helps find the most economical combination of speed and range.
The intuitive user interface of the DASH motor app, with bold, colorful graphics, quickly guides the owner through pairing with Elco motors and calculating battery capacity. A handy warning appears when only 20% of battery life remains. If the performance data falls outside operational parameters, the electric motor app displays warning indicators and sends a report to Elco for troubleshooting with the push of a button.
Elco EP-250 Downloads
Elco inboard drawing
Elco inboard overview 2024
Questions about Elco EP-250?
Open questions?
How does the order process work?
Simply click on "Add to cart". In the next step, enter your personal data and choose your preferred payment method.
As a specialist dealer, we will check your order and send you an order confirmation and invoice. After receipt of payment, we will send the desired items directly to the desired delivery address.
Within Germany, the delivery time is 3-4 working days. Of course, you will also receive a tracking link for your order.
Afterwards, we are always available personally for questions about assembly. Of course, we also provide instructions, tips and soon also explanatory videos.
For all products in our range, we offer a 2-year warranty - for some products even more.
In case of complaints, we are your contact person, we help you to ensure that everything runs smoothly. You can always reach us by email or phone. We also provide support for possible spare parts at any time. Your boat is our drive.
Your advantages using greenboatsolutions
Few clicks will save you a lot of time and stress!
You will get a result within 5 minutes.
You compare nearly 600 different electric motors.
You have an overview of more than 30 manufacturers.