ePropulsion I-10 Inboard
Input power: 10 kW
Status:
available
Shipping:
2-3 business days (in stock)
6.099,00 €
incl. 19% VAT
, excl.
The motor runs on 96V and must be installed and regularly maintained by a high-voltage technician. On request, we also offer the installation with.
Product configurator
Inboard motor
1 x ePropulsion I-10 Inboard
available
10 kW
€6,099.00
Selected
Motor
1 x ePropulsion G102-100
available
10.24 kWh
€5,999.00
Selected
1 x ePropulsion G102-230
available
23,55 kWh
€12,999.00
Battery
1 x ePropulsion I-Series Charger
available
3.300 W
€680.00
Selected
Accessories
1 x ePropulsion Smart Remote Control
available
€400.00
Selected
1 x ePropulsion Smart Display
available
€500.00
Selected
1 x ePropulsion G-Series Power Output Set 10m
available
€800.00
Selected
ePropulsion DC-DC converter 96V
available
€445.00
Optional
1 x ePropulsion power distribution block 250A
available
incl.
Selected
1 x ePropulsion ESSA communication cable 1 m
available
€28.00
Selected
1 x ePropulsion COM extension cable 5 m
available
€55.00
Selected
1 x ePropulsion COM extension cable 5 m
available
€90.00
1 x Battery CAN cable set 5m
available
€88.00
Selected
1 x ePropulsion ESSA 3-way T-connector
available
€28.00
Selected
ePropulsion ESSA 5-way T-connector test
available
€55.00
Optional
ePropulsion BUS remote switch "ON/OFF" incl. terminator
available
€138.00
Optional
Charger
ePropulsion solar charge controller 2 kW 96V
available
€530.00
Optional
Summary
1 x ePropulsion I-10 Inboard
€6,099.00
1 x ePropulsion G102-100
€5,999.00
1 x ePropulsion I-Series Charger
€680.00
1 x ePropulsion Smart Remote Control
€400.00
1 x ePropulsion Smart Display
€500.00
1 x ePropulsion G-Series Power Output Set 10m
€800.00
1 x ePropulsion power distribution block 250A
incl.
1 x ePropulsion G-Series Connection Cable 0.5m
€240.00
1 x ePropulsion ESSA communication cable 1 m
€28.00
1 x ePropulsion COM extension cable 5 m
€55.00
1 x Battery CAN cable set 5m
€88.00
1 x ePropulsion ESSA 3-way T-connector
€28.00
Total price
€14,917.00
Properties ePropulsion I-10 Inboard
kill switch
Yes
Input power
10 kW
comparable thrust
20 PS
Voltage
96 V
rotations per minute
1500 rpm
weight
43 kg
noise
55 dB
Noise level
audible noises
display
board computer with digital display
Speed control
stepless
saltwater resistant
Yes
propeller
optional
length
565 mm
width
295 mm
height
380 mm
control
Long distance gas/tiller
Info about the I-20 inboard from ePropulsion
-
Significantly easier maintenance and installation than a conventional diesel.
-
Battery alarm: an audible warning signal informs you of a low battery status.
-
Circa 60% space saving on the engine. The battery takes up comparable space to the previously installed tank.
-
Emergency stop magnetic chip - the electric motor stops as soon as the chip is removed.
-
The ePropulsion G102-100 battery is ideal for the I-20 kW motor. At least 2 pieces are needed. Third-party batteries can not be used.
-
Housing and plug connection are waterproof according to IP 67.
EPropulsion I-20 - Comfort in operation
-
The data from the battery and motor can be accessed via a cloud system from anywhere .
-
Plug & Play connection to the batteries. (facilitates installation)
-
Stepless control of the speed leads to efficient consumption.
-
Tracking and evaluation of trips possible. (Also possible over multiple accounts)
-
On the smartphone, the location, speed, battery capacity, charging time and much more info can be retrieved.
-
Guest access to the IoT system can be set up and fleet reports are available. Therefore, the drives are especially well suited for boat rentals.
10 kW inboard engine compared
|
|
|
|
|
|
|
|
|
|
|
ePropulsion I-10 Inboard | SHARK 11.0 | WaterWorld 10.0 | Aquamot Trend 11.0MA | VETUS E-LINE 11 kW | Aquamot MA110 | Elco EP-20 | E-Tech 10 WG | |
| Price | 6.099,00 € | 5.399,00 € | 6.799,00 € | 5.999,00 € | 6.599,00 € | 7.849,00 € | 7.699,00 € | 10.299,00 € |
| Availability |
available
|
available
|
available
|
available
|
available
|
available
|
available
|
available
|
| Shipping | 2-3 business days | 3-4 weeks | 1-2 weeks | 3-4 weeks | 3-4 weeks | 3-4 weeks | 1-2 weeks | 3-4 weeks |
| Input power | 10 kW | 11 kW | 11 kW | 12.35 kW | 13.3 kW | 12.35 kW | 10 kW | 10 kW |
| comparable thrust | 20 PS | 20 PS | 20 PS | 20 PS | 22 PS | 20 PS | 20 PS | - PS |
| weight | 43 kg | 75 kg | 76 kg | 45 kg | 71 kg | 45 kg | 33 kg | - kg |
| rotations per minute | 1500 rpm | 1400 rpm | 1500 rpm | 2300 rpm | 1600 rpm | 2300 rpm | 1800 rpm | - rpm |
| noise | 55 dB | - dB | - dB | - dB | - dB | - dB | - dB | - dB |
Technical features of the ePropulsion I-10
-
Low weight - 45 kg including all components.
-
Compact motor design: motor, gearbox, controller, control unit and water cooling in one housing. This makes installation much easier.
-
Very modern and sporty design with blue color accents. The model was among the finalists of the DAME Design Award at MetsTrade 2022.
. -
The I-20 kW is one of the few inboards produced in a high volume production line. Thanks to the origin from Asia, the prices can be seen in comparison with the competition.
-
The motor is not maintenance-free. High-voltage systems require regular maintenance. This should be taken into account at the time of purchase.
EPropulsion I-10 Inboard in use
Range from ePropulsion I-10
Driving time and range depend of course on the battery. With a 20 kWh battery, one achieves the following driving range:
- Under full load, the ePropulsion I-10 holds a good two hours.
- At 1/2 power, the driving pleasure holds for a 4-hour trip at a decent marching speed
- Who plans longer tours on the water, comes with less power still significantly further. At 1/4, 20 kWh is easily enough for 8 hours of driving.
The battery should be determined depending on the weight of the boat and the planned range.
Info about the control of the I-10
The smart throttle from ePropulsion comes with a 5" display for the best possible overview of all driving values. The display is thus significantly larger than in the smaller outboards. Visually, the color display makes a lot in any case.
For release, there will be a top and side throttle. In each case in single or dual version. So a twin system is possible for each of the inboards. Other controls have already been announced.
The manufacturer ePropulsion
ePropulsion is an innovative manufacturer of e-drives with the goal of advancing e-mobility in water sports. The idea came from four young engineers in Hong Kong in 2012.
With the aim of making environmentally friendly, clean and quiet engines competitive, they have since designed numerous models. These include the Spirit 1.0, Navy 3.0 or Navy 6.0 EVO. The models are characterized by top price performance. New to this now come the inboards I-10, I-20, I-40 and H-100.
More info about the I-Series inboards
ePropulsion Technology Limited produces electric boat drives without gears and with a high-quality brushless DC motor. The motors are therefore extremely quiet and low maintenance. ePropulsion offers boat motors with a wide range of functions such as GPS. Of course, there are also matching lithium-ion batteries and chargers in the range.
The motors in elegant design in conjunction with the powerful batteries ensure long-lasting performance. These are easy to handle, safe and technically up to date. They are therefore ideal for entry into e-mobility on the water.
EPropulsion I-10 Inboard Downloads
User Manual_Smart_Gas Lever
Technical_Drawing_ePropulsion_i-10
Questions about ePropulsion I-10 Inboard?
Open questions?
Safety information
Product safety images contain information about product packaging and may include important safety information for a specific product. Manufacturing information includes the address and related information of the product's manufacturer. EU-based economic operator who ensures that the product complies with the required regulations.
Guangdong ePropulsion Technology Limited Room 801, Building 1 11, Daxue Road, Songshan Lake 523808 Dongguan Guangdong Province info@epropulsion.de
DITOMA GmbH Mauserstraße 6/2 71640 Ludwigsburg info@ditoma.de
How does the order process work?
Simply click on "Add to cart". In the next step, enter your personal data and choose your preferred payment method.
As a specialist dealer, we will check your order and send you an order confirmation and invoice. After receipt of payment, we will send the desired items directly to the desired delivery address.
Within Germany, the delivery time is 3-4 working days. Of course, you will also receive a tracking link for your order.
Afterwards, we are always available personally for questions about assembly. Of course, we also provide instructions, tips and soon also explanatory videos.
For all products in our range, we offer a 2-year warranty - for some products even more.
In case of complaints, we are your contact person, we help you to ensure that everything runs smoothly. You can always reach us by email or phone. We also provide support for possible spare parts at any time. Your boat is our drive.
Your advantages using greenboatsolutions
Few clicks will save you a lot of time and stress!
You will get a result within 5 minutes.
You compare nearly 600 different electric motors.
You have an overview of more than 30 manufacturers.