BLADE HALO 10.0 outboard motor (6 kW)
Input power: 6 kW
Status:
orderable
Shipping:
3-5 days (from around 2026)
On request
Pre-order the powerful 6,000 W BLADE HALO 10.0 now. The Halo 10.0 requires an external battery with at least 125 A continuous output. We offer various options in our range.
We have been in close contact with BLADE from the very beginning and have provided plenty of feedback. The result speaks for itself: In terms of performance and price, the HALO 10.0 is certainly a real challenge to the competition!
A remote control is optionally available. Delivery expected from 2026.
shafttype
Product configurator
outboard
1 x BLADE HALO 10.0
orderable
Selected
Motor
1 x 48V 100Ah Bluetooth
available
5.12 kWh
€1,199.00
Selected
1 x 48V 100Ah Bluetooth
available
5,12 kWh
€1,399.00
1 x Ultimatron 48 V 100 Ah Bluetooth
available
5,12 kWh
€1,799.00
1 x BLADE battery 5 kWh
orderable
5 kWh
€2,269.00
Battery
1 x 48V 18A charger 900W
available
900 W
€229.00
Selected
1 x ACES Ladegerät 48V/10A 600W
available
600 W
€279.00
1 x ACES charger 48V/35A 2000W
available
2.000 W
€599.00
Accessories
BLADE HALO remote control
orderable
€269.00
Optional
300A 3,5" Batteriemonitor von DC House
available
€75.00
Optional
ECTIVE BM X Battery Monitor
available
€169.00
Optional
Battery Monitor BMV-700
available
€154.00
Optional
Charger
BLADE HALO solar panel 200W
orderable
200 W
€319.00
Optional
BLADE HALO 6.0 propeller
orderable
€39.00
Optional
Summary
1 x BLADE HALO 10.0
1 x 48V 100Ah Bluetooth
€1,199.00
1 x 48V 18A charger 900W
€229.00
Total price
On request
Properties BLADE HALO 10.0
Input power
6 kW
peak performance
6 kW
comparable thrust
10 PS
comparable speed
8 horsepower
Voltage
48 V
integrated battery
No
Noise level
almost silent
weight
24 kg
Shipping weight
30 kg
display
On-board computer with color display
kill switch
Yes
shafttype
Short/standard stem
control
pin
Speed control
stepless
saltwater resistant
yes
cooling
air
propeller
plastic
tilting mechanism
manual
trimming mechanism
manual 6-stage
tiltable tiller
Yes
telescopic tiller
No
maximum boat weight
4000 kg
recommended boat length
10 m
Warranty
2 Years
BLADE HALO 10.0 safety
-
Up to 2,400 W continuous power and up to 3,000 W short-term (Speedboost)
-
Excellent maneuverability thanks to the shape of a rudder (visually, of course, also modern and sleek)
-
Includes hydrogeneration for recharging while sailing (usually worthwhile on longer trips)
-
A small USB-A charging socket is integrated into the tiller, in case your smartphone runs out of power
-
Integrated magnetic kill switch for protection when falling into water - the motor stops immediately
-
External 5 kWh battery can be used optionally.
Operation of BLADE HALO 10.0
-
Very quiet in operation thanks to BLDC electric motor
-
Integrated tiller, but the HALO 10.0 can also be optionally equipped with remote steering
-
The tiller features a modern LCD display with real-time information on consumption and travel.
-
Two different shaft lengths: Short/Standard shaft (~62.5 cm) and Long shaft (~75 cm)
-
Manual trim with 6 levels: 0, 8, 16, 24, 32 and 90°
Comparison of outboard motors from 6 kW
|
|
|
|
|
|
|
|
|
|
|
|
|
BLADE HALO 10.0 | ePropulsion Navy 6.0 EVO | Torqeedo Cruise 6.0 R | Mercury Avator 35e | Haswing Armada 10.0 | Mitek 9.9 | Elco EP-14 | Elco EP-20 outboard motor | Aquamot Trend 8.0 | Hy.G 6 kW | |
| Price | On request | €3,499.00 | €4,749.00 | €4,699.00 | €2,699.00 | €5,099.00 | €5,799.00 | €6,379.00 | €6,699.00 | €8,899.00 |
| Availability |
orderable
|
available
|
available
|
available
|
available
|
available
|
available
|
available
|
available
|
available
|
| Shipping | 3-5 days | 1-2 weeks | 3-4 business days | 1-2 weeks | 3-4 business days | 2-3 weeks | 3-5 business days | 3-5 business days | 3-6 weeks | 3-4 weeks |
| Input power | 6 kW | 6 kW | 6 kW | 4.4 kW | 6 kW | 7.2 kW | 6.2 kW | 8.4 kW | 8 kW | 7 kW |
| comparable thrust | 10 PS | 9.9 PS | 9.9 PS | 8 PS | 10 PS | 9.9 PS | 14 PS | 20 PS | 15 PS | 20 PS |
| Voltage | 48 V | 48 V | 48 V | 48 V | 48 V | 48 V | 48 V | 48 V | 48 V | 48 V |
| weight | 24 kg | 36 kg | 21 kg | 21.3 kg | 27.7 kg | 28 kg | 38.5 kg | 38.5 kg | 52.2 kg | 19 kg |
Technical check by BLADE HALO 10.0
-
Incl. Bluetooth connection to the app and optional NMEA 2000 connection to Garmin OneHelm possible!
-
11" 2-blade propeller made from a nylon composite
-
External 5 kWh Li-NMC battery available
-
The motor weighs 24 kg and the battery weighs 35 kg.
-
Efficient direct drive that is passively cooled by the surrounding water. The pod features ducts for flow optimization.
-
Housing made of aluminum in combination with stainless steel. (Corrosion protected)
-
Lightweight Li-NMC technology from the automotive sector with CE certification and UN38.3 transport certification. 2,000 charge cycles.
BLADE HALO 10.0 in the video
Due to the current cookie settings, the Youtube video cannot be displayed.
Range of BLADE HALO 10.0
Travel time and range depend on the battery. Performance data with the Blade Halo 10.0 are coming soon.
In an example with the BLADE HALO 6.0 and the 1700-Wh battery on a 4.00 m aluminum boat, we recorded the following measurements:
→ At full power (2,400 W), the HALO 6.0 runs for about 45 minutes. The speed in this case is around 15.4 km/h. Within this short time, a range of 11.9 kilometers could be covered.
→ At about half power (1,000 W), the ride lasts for approximately a 1.5-hour trip on the water at a cruising speed of 10.4 km/h and a range of 15.9 km.
→ If you are planning longer and more leisurely tours on the water, you can go significantly further with less power. At 1/8 (250W) of the power, a speed of 7.3 km/h was achieved for 6.5 hours. This results in a total range of 49.3 km. And all that with just one battery charge!
Thanks to the 240 W charger, the battery is fully recharged in about 7 hours.
Accessories from BLADE-Outboards
The scope of delivery includes, in addition to the motor, the 2-blade propeller, a manual, a magnetic chip, a few stickers, a hardware kit, and tools for the propeller.
In addition, BLADE will offer a wide range of accessories: a solar panel with solar charge controller for recharging while driving, a NMEA2000 connection cable, and above all, a remote control. The Blade 10.0 outboard motor can be operated with an external 5 kWh battery.
Electric motor with battery for inflatable boats
Official BLADE partner & dealer in Europe
You can now (pre-) order your BLADE outboard motor from us. We have an external warehouse from which we ship the motors directly to you. Of course, we will also have a few motors ready for pickup in our showroom in the future.
We look forward to your message or call and are happy to help you with any questions about the HALO 6.0 at any time. Your team from greenboatsolutions.
Electric motors from the manufacturer BLADE Outboards
The headquarters of BLADE Outboards is in the USA with a team that is active worldwide and has dealers. The outboard motors were mainly developed in Singapore and mass production is located in China - simply to have cost advantages in manufacturing.
BLADE pursues a very aggressive pricing strategy and does without intermediate importers or large marketing at expensive boat shows. At BLADE, all resources are invested in product development and the quality of the motors. As dealers, we were able to provide feedback early on in product development and the colleagues were always open to our input.
Questions about the BLADE HALO 10.0?
Open questions?
Safety information
Product safety images contain information about the product packaging and may include important safety information for a specific product. Manufacturing information includes the address and related information of the product's manufacturer. An EU-based economic operator who ensures that the product complies with the required regulations.
Blade Technologies Commercial Group 1000 Brickell Avenue 715 Miami, FL 33131 [USA] info@bladeoutboards.com
How does the order process work?
Simply click on "Add to cart". In the next step, enter your personal data and choose your preferred payment method.
As a specialist dealer, we will check your order and send you an order confirmation and invoice. After receipt of payment, we will send the desired items directly to the desired delivery address.
Within Germany, the delivery time is 3-4 working days. Of course, you will also receive a tracking link for your order.
Afterwards, we are always available personally for questions about assembly. Of course, we also provide instructions, tips and soon also explanatory videos.
For all products in our range, we offer a 2-year warranty - for some products even more.
In case of complaints, we are your contact person, we help you to ensure that everything runs smoothly. You can always reach us by email or phone. We also provide support for possible spare parts at any time. Your boat is our drive.
Your advantages using greenboatsolutions
Few clicks will save you a lot of time and stress!
You will get a result within 5 minutes.
You compare nearly 600 different electric motors.
You have an overview of more than 30 manufacturers.